EXFO MAX-730D-SM8-Oi is a dedicated PON and metro OTDR with iOLM functionality for efficient fiber characterization, activation, and troubleshooting. It combines 1310/1550 nm testing with 1650 nm live-fiber testing in a rugged, tablet-inspired field tester.
Why choose the EXFO MAX-730D-SM8-Oi?
- Built for PON and metro networks: Test through optical splitters up to 1×128 and characterize end-to-end FTTH links.
- Three test wavelengths: 1310 nm and 1550 nm for standard single-mode fiber testing, plus 1650 nm for in-service live-fiber troubleshooting.
- Up to 39 dB dynamic range: Measure point-to-point links up to 132 km, depending on network conditions and test setup.
- Short dead zones: Event dead zone (EDZ) of 0.5 m, attenuation dead zone (ADZ) of 2.2 m, and PON dead zone of 30 m.
- Field-ready operation: Rugged, lightweight design, a 7-inch outdoor-enhanced touchscreen, and up to 12 hours of autonomy.
- Optional in-line power measurement: Support for an optional in-line GPON/XGS-PON power meter for FTTx service work.
Applications
- FTTx and PON testing through splitters
- FTTx service activation for GPON, EPON, XGS-PON, and 10GE EPON
- Point-to-point access network testing
- Metro link testing
- Live-fiber troubleshooting
- Passive Optical LAN (POL) testing
Key specifications
| Specification | Details |
|---|---|
| Model | EXFO MAX-730D-SM8-Oi |
| Test wavelengths | 1310 nm, 1550 nm, and 1650 nm |
| Dynamic range | Up to 39 dB |
| Point-to-point reach | Up to 132 km |
| Event dead zone | 0.5 m |
| Attenuation dead zone | 2.2 m |
| PON dead zone | 30 m |
| Connector options | APC/SC or APC/FC |
| Display | 7-inch outdoor-enhanced touchscreen |
| Battery autonomy | Up to 12 hours |
Connector options
Choose the connector configuration that matches your test leads and network equipment: APC/SC or APC/FC.
Frequently asked questions
Can the MAX-730D-SM8-Oi test live fiber?
Yes. Its 1650 nm wavelength is intended for in-service live-fiber testing and troubleshooting.
Is this OTDR suitable for PON testing through splitters?
Yes. It is optimized for FTTx/PON characterization through optical splitters up to 1×128.
Which fiber networks can it support for service activation?
The listed applications include GPON, EPON, XGS-PON, and 10GE EPON service activation.
Which connector should I select?
Select APC/SC or APC/FC according to the connector on your test lead and the equipment in the network under test.
